Home > Products > Connector and treminal > JWPF Connector

JWPF Connector

This is a 2.0 mm pitch wire-to-boardconnector with water ingress protection withan IPX7 rating per IEC 60529 (grade 7 perJIS C 0920), suitable for use for the place ofwhich waterproof is required

Inquire Now

PDF

Product Feature
Dimension
Technical Data
Recommended Products
Inquiry

Product Feature

Auto Waterproof Electrical Connector

This is a 2.0 mm pitch wire-to-boardconnector with water ingress protection withan IPX7 rating per IEC 60529 (grade 7 perJIS C 0920), suitable for use for the place ofwhich waterproof is required

Water ingress protection with an IPX7 ratingper IEC 60529 (grade 7 per JIS C 0920)Pre-installed seal ringA method of plugging by seal rubber plate

in bulk

Double-spring constructionHousing lance

Inner lock mechanismSuitable for potting processReceptacle is used in common with wireto-wire connectors.

Auto Waterproof Electrical Connector Parameter

Current rating:	3 A AC/DC (AWG #22)
Voltage rating:	100 V AC/DC
Temperature range	-55'C to +85C(including temperature rise inapplying electrical current)
Contact resistance:Initial value	10 mQ max.
After environmental tests	15 mQ max
insulation resistance	1.000 MO min
Withstanding voltage	There shall be no breakdown or flashover whileapplying 1,000 VAC for one minute.
Applicable wire range:	Conductor size/ AWG #26 t AWG #22Insulation O.D./ 1.4 mm to 1.7 mmWater ingress protection with an IPX7 rating perIEC 60529 (grade 7 per JIS C 0920)Applicable PC board thickness: 1.6 mm

How Do You Auto Waterproof Electrical Connector in a Car?

Use waterproof connectors: This is the most common and effective way to waterproof electrical connectors. Waterproof connectors are designed to prevent water from entering the connection, and they are available in a wide range of sizes and configurations. To use waterproof connectors, simply disconnect the electrical wires from the connectors, apply a thin layer of dielectric grease to the connector terminals, and then insert the wires into the connectors and tighten the screws.

Some Additional Tips for Auto Waterproof Electrical Connectors in a Car:

Make sure that the connectors are properly tightened.

Avoid using electrical tape as a permanent waterproofing solution.

Inspect the electrical connectors regularly for signs of damage or corrosion.

Replace any damaged or corroded electrical connectors immediately.

By following these tips, you can help to ensure that the electrical connectors in your car are properly protected from water damage.

auto waterproof electrical connector

Auto waterproof electrical connectors are an essential part of any vehicle's electrical system. They help to protect the wires from damage caused by water intrusion, which can lead to electrical shorts, corrosion, and other problems.